Name
|
Allows you to name the profile.
It will then appear against most other items with that name and with
Not that name.
|
Security
|
Defines the security level
controlling which users can view or edit this profile. |
Profile
|
Allows this profile to depend on
another profile, either AND or OR another [not] profile. If unsure,
leave as AND 24/7
|
Mode
|
The profile can be time based,
or manually controlled, ping based or checking tunnel state.
|
Alert LED
|
This allows the RED alert LED on
the front of the FireBrick to be affected by the profile automatically.
|
Re-route
|
If this is set and a profile
changes, traffic is re-evaluated for possible re-routing if routing
rules are based on this profile.
|
Ping address
|
If a ping profile, this is the
address to ping
|
Ping TTL
|
This allows the time to live to
be set on the pings.
|
Optional Interface
|
Allows you to specify an
interface or interface and subnet via which pings are to be sent,
otherwise normal routing rules apply. This is also used for tunnel
state mode to specify the tunnel.
|
Optional Source IP
|
Allows you to specify the source
IP for the ping. This is normally set automatically, and setting a
subnet/interface (above) will set for that subnet specifically
|
Optional Gateway IP
|
Allows you to specify the
gateway IP for the ping. This is normally set automatically, and
setting a subnet/interface (above) will the DHCP gateway for that subnet
|
24/7
|
Ticking this causes all hours of
all days to be set on
|
As above
|
This allows one day to be set
the same as the previous
|
9 to 5
|
This forces a day to be set for
9am to 5pm
|
Clr/24
|
The clr option causes the whole
day to be cleared, and the 24 option causes the whole day to be set on
|
Hours
|
Each hour can be set on or off
specifically. This affects timed profiles, and also when pinging is
done.
|